HomeBest SellersSpecial OffersAbout usNewsContact
Categories   /   PA and Live Sound   /   Tools and Testing

ARTcessories - CableCOP - Cable Tester

IMAGES

£39.99

Ref art12340
Manufacturer ARTcessories
Category Tools and Testing
Delivery Info

View all ARTcessories Tools and Testing

View all ARTcessories products

View all Tools and Testing products

DESCRIPTIONKEY FEATURESSPECIFICATIONREVIEWS (0)

There are several types of cables used widely in pro audio mic cables and patch cords with 2 or 3 conductors, instrument cables with 2 conductors, basic speaker cables with 2 conductors and MIDI cables comprised of DIN5 connectors using 2 conductors.

The CableCOP features a full selection of standard pro audio connectors for testing all such cables. LEDs on the CableCOP link its various connector terminals and will only illuminate when the connected cable completes a circuit. As a result you\\\'re able to tell, at a glance, which cables need to be repaired. Sometimes the problem can be the cable itself. An LED may also fail to illuminate if a 3-conductor cable has been wired out-of-phase. As an example, if the Tip of one 1/4 TRS plug on a (balanced) patch cable were soldered to the same cable conductor as the Ring or Sleeve of the other 1/4 inch TRS plug.

Write A Review

Fields marked with a * are required.




There are no reviews for this product
ALTERNATIVE PRODUCTS

 
Product Picture

The FBQ2496 is the fastest (Less than 0.2 sec.) and the only 96 kHz ...

Product Picture

Hum  in an audio system is often caused by loop effects which act like...

 

£160.00

INFO BUY

£39.99

INFO BUY
 
 
Product Picture

The CLEANBoxPro provides two channels of unbalanced to balanced level ...

Product Picture

This good quality meter is ideal for the measurement of noise levels in...

 

£54.99

INFO BUY

£69.99

INFO BUY